Stop guessing. Start enforcing.
No inspection. No start.
A small PreStartGo interlock on each machine means it won't start until the operator completes the pre-start on their phone. Every check and defect is recorded and can't be edited afterwards, so you can prove it happened.
From A$39 per machine per month.
Talk to us for a quote for your fleet.
Phone
Pre-start passed
Interlock
Unlocked
Machine
Start permitted
How it works
Scan. Check. Start.
Pre-starts on a phone, in the field
Operators scan the machine's GoTag, work through the checklist with photos, and the app unlocks the machine. Pre-starts keep working with no coverage and sync when the phone is back in range.
Scan
Scan the machine's GoTag
Check
Work through the checklist
Start
Cleared — the machine unlocks
Status LED
Solid green when unlocked. Solid red when a pre-start is required.
Mode button
Hold it for ten seconds for the emergency bypass, where the button bypass is enabled.
Main relay
Holds the interlocked circuit open while the machine is locked.
Supply
6–36 V DC: suits 12 V and 24 V systems.
The Interlock
Compliance enforced by copper wire, not checkbox.
The machine won't start until it's checked
A relay fitted by a licensed auto electrician sits in the starter circuit, or in the operator-presence circuit where that suits the machine, and holds it open until a completed pre-start unlocks it over Bluetooth. No phone signal is needed once the phone holds that machine's unlock key, which it fetches online the first time.
- Fitted by
- A licensed auto electrician
- Circuit
- Starter or operator presence
- Unlock
- Bluetooth, from the operator's phone
- Ingress protection
- IP57
- Certification
- RCM certified
Fail-START
On power loss the relay defaults to letting the machine start — operators are never stranded. The Interlock is a compliance-enforcement tool, not a safety-rated isolation device.
The office
Every machine. Every check. One place.
Proof you can stand behind
Every check and every defect is written to an append-only record that nobody can edit after the fact. The reports a client, an auditor or the regulator asks for are ready when you need them.
Defects don't get lost
A failed item raises a defect the whole team can see, from the moment it is reported to the moment it is closed. When the failed item is critical, the machine's pre-starts fail until that defect is closed. A technician can also take a machine out of service: its pre-starts then fail until it is lifted out of service — closing the defect doesn't.
GPS tracking coming.
Built for companies that own and run plant
- Plant hire
- Civil
- Mining
- Earthmoving
Want to see it on one of your machines?
Tell us what you run and where, and we'll come back to you with what it takes to fit your fleet.